//////////////////////////////////////////////////////////////
///  phpThumb() by James Heinrich <info@silisoftware.com>   //
//        available at http://phpthumb.sourceforge.net     ///
//////////////////////////////////////////////////////////////
///                                                         //
//    Frequently Asked Questions (FAQ) about phpThumb()     //
//                                                         ///
//////////////////////////////////////////////////////////////


Q: My question isn't answered here and I can't find any
   forums, how do I get support?
A: Please email me directly at info@silisoftware.com with
   any questions, suggestions, donations, etc.


Q: What is the GPL? Can I use this for commercial sites?
A: See the GPL FAQ: http://www.gnu.org/licenses/gpl-faq.html
   In general, if you just want to call phpThumb.php in the
   standard <img src="phpThumb.php?src=pic.jpg&w=100"> manner
   then there is no problem, you're free to do this no matter
   if you site is commercial or not, or what license your code
   is released under.
   If you're calling phpThumb() as an object then you will
   probably run into license issues, so consult the above FAQ
   and the GPL itself.
   No matter if you use phpThumb() commercially or not, no
   payment is required. However, donations are always welcome
   and can be made at http://phpthumb.sourceforge.net


Q: Some images generate thumbnails, but some fail (the original
   non-resized image is output instead).
A: Your PHP installation does not have a high enough memory_limit
   and ImageMagick is not installed on the server. The PHP memory
   required is 5 times the number of pixels in the image.
   For example:
     640x480x5   = 1.5MB
     1600x1200x5 = 9.2MB
   You can adjust the PHP memory limit in php.ini (if you have
   permission on your server to do so), or (better yet) install
   ImageMagick on the server and that will bypass the memory limit
   issue. If you can't do either of the above, you can resize the
   images manually (with your favourite image editor) to a size
   that your memory_limit setting can handle, and/or you can
   re-save the images with an image editor that can embed an EXIF
   thumbnail (Photoshop for example) which phpThumb can use as an
   image source (lower image quality, but perhaps better than
   nothing).


Q: I'm getting is this error message:
   Failed: RenderToFile(<filename>) failed because
   !is_resource($this->gdimg_output)
A: You missed the call to GenerateThumbnail() before
   RenderToFile() or OutputThumbnail.
   See /demo/phpThumb.demo.object.php for an example.


Q: I'm trying to save a phpThumb-generated image in Internet
   Explorer and it saves in BMP format, why?
A: This is not phpThumb's fault, it is an IE issue:
   http://support.microsoft.com/default.aspx?scid=kb;en-us;810978
   http://support.microsoft.com/default.aspx?scid=kb;en-us;260650


Q: PNG images with transparent areas show up with gray background
   in the areas that are supposed to be transparent.
A: Internet Explorer has had a broken PNG alpha-channel display
   implementation for a decade, so it may never get fixed. Other
   major browsers generally handle alpha-transparent PNGs fine.
   See http://www.silisoftware.com/png_transparency/
   For an alpha-channel PNG display in IE hack, see this page:
   http://www.koivi.com/ie-png-transparency/


Q: I'm getting "<filename> does not exist" when I know the
   file does exist
A: Check these two values are present and properly configured
   in phpThumb.config.php (introduced in v1.6.0):
   $PHPTHUMB_CONFIG['allow_src_above_docroot']  (default=false)
   $PHPTHUMB_CONFIG['allow_src_above_phpthumb'] (default=true)
   If your images are outside DOCUMENT_ROOT then you will have
   to configure 'allow_src_above_docroot' to true.


Q: Should I use phpThumb.php, or use phpThumb() as an object?
A: phpThumb.php is easier to use (less coding) for basic uses.
   phpThumb.php handles all caching; your own object will need
   to have its own caching code. If you just want to display a
   thumbnailed version of an existing image, use phpThumb.php
   If you want to render one (or more) thumbnails to static
   files (during upload, for example), that's an appropriate
   use for the object mode. Also, phpThumb.config.php is only
   used by phpThumb.php, so if you instantiate your own object
   you need to manually set all configuration options because
   phpThumb.config.php has NO effect. So, to repeat:
   **always use phpThumb.php unless you NEED to have an object**


Q: Are there any front-end GUI interfaces to phpThumb()?
A: See /demo/readme.demo.txt


Q: Are there / have there been any security issues in phpThumb?
A: http://secunia.com/product/5199/


Q: Why can't Flash work with images output from phpThumb()?
A: Flash doesn't like progressive JPEG. Set:
   $PHPTHUMB_CONFIG['output_interlace'] = false;


Q: Image quality is not very good - why?
A: If you're using GD v1.x, no way around it. Upgrade to GD v2.x


Q: Image quality is very bad, very pixelated -- why?
A: You may be trying to resize images larger than the available
   PHP memory, so phpThumb is simply extracting and using the
   EXIF thumbnail as the image source, which is usually about
   160x120 (so if you resize it to 640x480 it will look very bad).
   To calculate the required size for memory_limit in php.ini,
   calculate the number of pixels in the image and multiply by 5:
   For example, 1600x1200 = 1600 * 1200 * 5 = 9600000 = 10M


Q: Can I save the generated thumbnail to a file?
A: Yes, there are several ways to do so; the best way is to call
   phpThumb as an object and call RenderToFile() to save the
   thumbnail to whatever filename you want.
   See /demo/phpThumb.demo.object.php for an example.
   The other way is to use the 'file' parameter (see
   /docs/phpthumb.readme.txt) but this parameter is deprecated
   and may not exist in future versions of phpThumb().


Q: "Off-server thumbnailing is not allowed" -- how do I enable it?
A: By default, phpThumb() only makes thumbnails for the same domain
   that it is running on. To allow it to make thumbnails for a limited
   number of other domains, add them (in phpThumb.config.php) like this:
     $PHPTHUMB_CONFIG['nohotlink_valid_domains'] = array(
     	@$_SERVER['HTTP_HOST'], 'example.com', 'www.example.com',
     	'subdomain.example.net', 'example.org');
   To disable off-server thumbnail blocking, just set:
     $PHPTHUMB_CONFIG['nohotlink_enabled'] = false;


Q: Is it possible to set the parameters (like w/h/fltr[]) in the config,
   so that they can't be changed over the URL?
A: Take a look at $PHPTHUMB_DEFAULTS at the bottom of phpThumb.config.php
   You'll want to set $PHPTHUMB_DEFAULTS_GETSTRINGOVERRIDE=false,
   possibly also $PHPTHUMB_DEFAULTS_DISABLEGETPARAMS=true.
   You may also want to investigate $PHPTHUMB_CONFIG['high_security_enabled']
   (see the example at the bottom of phpThumb.config.php for how to call
   images in HighSecurity mode.


Q: Is there a way to use phpThumb() object to create thumbnails without the
   parameters in the URL showing the location of the image etc?
A: There is a demo in /demo/phpThumb.demo.object.php. You could modify this
   into your own file, but there still remains the problem of passing
   parameters to the file, whether it's phpThumb.php or your own instantiation
   of a phpThumb() object. I would suggest is putting as many of the common
   parameters into phpThumb.config.php as possible under $PHPTHUMB_DEFAULTS,
   so you then don't have to pass them for each image. If you don't want people
   modifying the parameters, turn on $PHPTHUMB_CONFIG['high_security_enabled']
   and set a password (you'll need to generate the <img> tags with phpThumbURL()
   provided at the bottom of phpThumb.config.php). If you don't want people
   accessing your source images at all, you can place them outside DOCUMENT_ROOT
   on your server (as long as phpThumb/PHP has read access to the directory).
   The other option is to put your source images in a MySQL database and set
   $PHPTHUMB_CONFIG['mysql_query'] and related parameters in phpThumb.config.php
   to pull your source images from the database. That way it's impossible to
   retrieve the images except through phpThumb.php, and if high_security is enabled,
   then nobody can modify the parameters to view anything except what you want to show.
   So, yes, it's possible to use your own object, but it's probably better to use
   phpThumb.php if possible -- one notable issue is that phpThumb.php handles all
   the caching, so you're on your own to deal with that if you create your own object.


Q: phpThumb runs slowly, as if the images aren't cached, when I use HTTP source
   images (not on my server). How can I make it go faster?
A: $PHPTHUMB_CONFIG['cache_source_filemtime_ignore_remote'] = true;
   // if true, remote source images will not be checked for modification date and
   // cached image will be used if available, even if source image is changed or removed


Q: What does the "cache_default_only_suffix" configuration option do?
A: Cache files are normally created with big ugly names like
   "phpThumb_cache_www.example.com_src1a482c2c760463795ff18faf073b389f_par3e099041c2f4a73041a7f5d7e7fc481a_dat1119952152.jpeg"
   but if cache_default_only_suffix is enabled, cache filenames are simplified to
   "pic_thumb.jpg" (for example). The problem is that only one version of that
   thumbnail is possible, and you can never call it again with a different size,
   or different filters, etc.  Generally you don't want that enabled, but it's
   there because some people asked for it.


Q: Why is the visual size of rotated images smaller than the unrotated images?
A: phpThumb fits the rotated image into the 'w' and 'h' dimensions.
   Try not specifying a 'w' parameter: phpThumb.php?src=file.png&ra=15
   That should leave the image the apparent same size as the unrotated image
   (in actual fact the canvas size is enlarged to fit the rotated image in it).
